
Quick Answer
Most plotter and wide-format printer problems fall into four groups: banding or faint lines from clogged printhead nozzles, banding in every color from a paper-advance calibration problem, paper feed and cutter faults, and carriage or system errors. Run the printer’s nozzle check, printhead cleaning and alignment first. If the problem survives those, or the printer shows a carriage or system error, it needs a technician.
For architects, engineers, contractors and print shops, a wide-format printer that’s down means drawings that don’t go out on time. The good news is that many plotter problems can be diagnosed in minutes with the printer’s own built-in tools. Here’s how to tell what’s wrong, and when to call for service.
Common Plotter Problems and What Causes Them
| Symptom | Likely cause | First step |
|---|---|---|
| Faint, missing or banded lines in one or a few colors | Clogged printhead nozzles | Print a nozzle check; run printhead cleaning |
| Banding across all colors | Paper-advance calibration | Run the paper or substrate advance calibration |
| Fuzzy lines or colors that don’t line up | Printhead misalignment | Run printhead alignment |
| Skewed prints, paper jams, roll won’t load | Media loading, worn feed parts, wrong media setting | Reload the roll; match the paper type setting |
| Rough or incomplete cuts | Worn cutter or debris in the cutter path | Check for paper scraps; call for service if it continues |
| Carriage won’t move, system or error codes | Mechanical or electronic fault | Power-cycle once, then call a technician |
Banding, Faint Lines and Missing Colors
Most wide-format printers are inkjets, so the most common problem is clogged printhead nozzles. Canon’s guidance for its imagePROGRAF printers is a good model for any brand: if prints look faint or show banding in some colors, print a nozzle check pattern. If parts of the lines are faint or missing, the nozzles for those colors are clogged. Clean the printhead, then print the pattern again.
Canon says that if the lines are still faint after repeating cleaning several times, it’s time to contact support. In practice, that usually means a printhead needs to be replaced.
HP’s troubleshooting for its large-format printers adds a useful rule of thumb: banding in every color usually points to paper or substrate advance, not the printheads. That’s fixed with the printer’s advance calibration rather than cleaning. Banding in only some colors points back to the printheads.
Paper Feed, Skew and Cutter Problems
Roll-fed printers are sensitive to how the roll is loaded. Before you assume a hardware fault:
- Unload and reload the roll, making sure it’s straight and the leading edge is cleanly cut.
- Check that the paper type selected on the printer matches the media you loaded.
- Look for scraps of paper in the paper path and around the cutter.
If prints still skew, jam repeatedly or the cutter leaves ragged edges, worn feed rollers or a worn cutter are the likely cause. Both are routine service parts.
Carriage Errors and System Errors
Carriage errors, “system error” messages and numeric error codes usually mean a mechanical or electronic fault: a carriage that can’t move freely, a sensor problem, or a failing board. Turn the printer off and back on once. If the error returns, stop there. Forcing the carriage or repeatedly restarting can make the damage worse. Note the exact error code; it helps the technician bring the right parts.
Repair or Replace Your Wide-Format Printer?
Repair usually makes sense when:
- The problem is a printhead, cutter, feed roller or calibration issue.
- The printer is a business-class model and parts are still available.
- You print regularly and the printer otherwise performs well.
Replacement is worth considering when the manufacturer no longer supplies parts, repair costs approach the price of a newer model, or your printing needs have changed. Ask for a quote with parts and labor listed separately so you can compare.
Wide-Format Printer Repair in the Twin Cities
IOT Solutions repairs wide-format printers and plotters, along with copiers, laser printers and scanners, for businesses across the Twin Cities and greater Minnesota. The most common wide-format lines in offices are HP DesignJet, Canon imagePROGRAF and Epson SureColor; call us with your make and model. Our technicians come to your office, so large-format equipment doesn’t have to be moved.
Frequently Asked Questions
Why is my plotter printing lines or banding?
Banding in one or a few colors usually means clogged printhead nozzles; print a nozzle check and run a printhead cleaning. Banding in every color usually points to paper-advance calibration, which you can run from the printer’s maintenance menu.
How do I unclog plotter printheads?
Use the printer’s built-in nozzle check and printhead cleaning, then print the check pattern again. If the nozzles are still blocked after several cleaning cycles, the printhead likely needs replacement.
Can a plotter be repaired on-site?
Yes. Most wide-format printer repairs, including printheads, cutters, feed rollers and calibration, can be done where the printer sits, so you don’t have to move large equipment.
What should I do when my plotter shows a carriage or system error?
Power-cycle it once. If the error comes back, note the error code and call for service. Repeated restarts or forcing the carriage can cause more damage.
Plotter down before a deadline? Call IOT Solutions at 651-448-2831 or request service. Learn more about our office equipment repair, which covers wide-format printers, plotters, scanners and multifunction devices.
Sources: Canon: checking for nozzle clogging (imagePROGRAF); HP: troubleshooting horizontal banding on large-format printers.
